You will need to manually configure your Internet connection. There are two methods of instructions you can follow to setup your Internet connection.
If you are still in the Setup Wizard:
Do one of the following:
Verify the power cord and all the Ethernet cables are connected correctly, then press Detect Connection to attempt the automatic configuration of your Internet connection.
Manually configure your connection by selecting your Internet connection type: either Cable, DSL router, satellite, ISDN, LAN, or other or DSL modem (also known as PPPoE) and any information required by you ISP.
Click Next and continue to follow the on-screen instructions to complete the Setup Wizard.
If you have already closed the Setup Wizard:
Start a Web browser.
In the location or address line of your Web browser, type 192.168.2.1 to access the router configuration pages.
Click the Internet tab.
Select your Internet connection type: either Cable, DSL router, satellite, ISDN, LAN, or other or DSL modem (also known as PPPoE) and add any information required by you ISP.
When you are finished, click Save. You should now be able to access the Internet.
Return to Troubleshooting page