This page allows you to configure wireless bridge features of the wireless LAN interface. You can select Wireless bridge (also known as Wireless Distribution System or WDS) to disable access point functionality. Selecting Access point enables access point functionality. Wireless bridge functionality will still be available and wireless clients will be able to associate with the AP.
Select Disabled in Bridge Restrict, which disables wireless bridge restriction. Any wireless bridge will be granted access. Selecting Enabled enables wireless bridge restriction. Only those bridges selected in Remote Bridges will be granted access.
Press Refresh to update the remote bridges. Please wait a while for the update.
Note: Bridge restrict is not allowed when WPA2, RADIUS, or both TKIP and AES are used. You can change these settings on the Wireless Security page.
Press Apply to save your changes.