The USRobotics ADSL2+ Ethernet/USB Router User Guide uses scripting to display its information correctly. This browser either doesn’t support scripting or has scripting disabled. Please refer to your browser’s documentation for instructions on how to enable scripting.

ISP uses PPPoE

Enter the following PPPoE (Point-to-Point Protocol over Ethernet) settings provided by your ISP:
- VPI/VCI: Enter the Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI).
- Encapsulation: Select the encapsulation method for your ISP.
- Username: Enter your assigned user name.
- Password: Enter your password.
- Confirm Password: Confirm your password.

Click NEXT to continue to the Confirm page.