The USRobotics ADSL2+ Ethernet/USB Router User Guide uses scripting to display its information correctly. This browser either doesn’t support scripting or has scripting disabled. Please refer to your browser’s documentation for instructions on how to enable scripting.

Password Settings

Use this page to change the password for your ADSL2+ Ethernet/USB Router.

The ADSL2+ Ethernet/USB Router lets you set a password up to 12 characters long. These fields are case-sensitive.

Note: If you lost the password, or you cannot gain access to the Web User Interface, press in and hold the Reset button on the rear panel for at least 5 seconds to restore the factory defaults. By default, there is no password to log in to the WUI.

System - Password

Reset Your Password

Enter your Current Password.
Enter the New Password.
Re-enter your password to confirm the new password.
Enter a maximum Idle Time Out (in minutes) to define a maximum period of time for which the login session is maintained during inactivity. If the connection is inactive for longer than the maximum idle time, it will perform a system logout and you will have to log in again to access the WUI. The default is 10 minutes.
Click SAVE SETTINGS.