This page has been designed for printability. To print this document, click the Print button on your browser's toolbar. When you are finished, click the Close Window button located at the upper-right or bottom of the page to close this window and return to the previous page.

Changing the Channel on your USR5455.

To change the channel that your 5455 transmits on please follow these simple steps. It is advisable to perform the change whilst connected to the device via an ethernet cable.

  1. Type into your web browser address line to log into the 5455. (If you have changed the default IP address, please enter your own)
  2. Enter your user name and password.
  3. Once logged in, select the Wireless tab.
  4. In the Transmission sub section you can alter the channel number using the drop down menu labelled Channel.
  5. Press Save

The Wireless Channel has now been changed.

Was this FAQ helpful? (1 = not helpful, 5 = very helpful)
1   2   3   4   5  
Did it resolve your problem?
Yes Si   No   Not sure (haven't tried it yet)  
Additional Comments (255 characters maximum)

Close Window