Destek


This page has been designed for printability. To print this document, click the Print button on your browser's toolbar. When you are finished, click the Close Window button located at the upper-right or bottom of the page to close this window and return to the previous page.


Do I need a static IP? How do I set it up?

By default, the IP Setting is set to Automatic IP. This is the recommended setting and will allow the uShare™ Mini NAS Adapter to obtain its IP address automatically.

If you prefer, select Static IP and enter your IP address, Subnet Mask, Gateway and Primary DNS server information, then click Apply. Static IP addresses are useful when mounting network drives or using with port forwarding.

 

Was this FAQ helpful? (1 = not helpful, 5 = very helpful)
1   2   3   4   5  
 
Did it resolve your problem?
Yes Yes   No   Not sure (haven't tried it yet)  
 
Additional Comments (255 characters maximum)

Close Window