This page has been designed for printability. To print this document, click the Print button on your browser's toolbar. When you are finished, click the Close Window button located at the upper-right or bottom of the page to close this window and return to the previous page.
How do I connect the ATX Power Cable?
Locate an available PCI Express slot and remove the bracket cover.
Inside of a computer with an open PCI Express Slot and an available Power Cable
Connect 4P power cable from the computer's power supply to the card.
Insert the card into the open PCI Express slot and fasten the bracket to the case.
Insert the PCIe into an open slot
Fasten the bracket and make sure card is connected properly.
Installed PCIe, continue installation by returning cover, turning on and inserting installation cd.