USR5450 802.11g Wireless Turbo Multi-Function Access Point
(USR805450CAN)
5450
MoreClick for more product images

Warranty: 2 Year

FAQs

  • How does USR5450 compare to USR8054
  • When will the 125 Mbps upgrade be available?
  • What is 802.11 wireless networking?
  • Do I have the correct drivers?
  • How is 100Mbps achieved?
  • Mixed-network performance?
  • What is my default Login and Password?
  • Wireless range performance
  • Additional Support

    If the support information in this section doesn't help you solve your issue, you can contact a USR Help Desk Technician directly.

    Verify your product

    Is this your access point? Verify that the label on the bottom of the access point looks like the image below. This product is not a router, if you have a router check the USR8054 page.

    Label on the Bottom Panel
    5450

    Manuals and other Documents

    OS Compatibility

    Product is operating system Independent and is compatible with all current Windows, Macintosh, and Linux operating systems

    Released Firmware and Configuration Utility
    Warning: Verify your product is the USR5450 Wireless Turbo Multi-Function Access Point before upgrading. This will NOT work with the Wireless Turbo Router USR8054.

    Note: It is critical that the AP have a valid IP Address before trying to update the firmware. Since the update process uses TFTP, a valid network IP Address is required. 0.0.0.0 is not a valid IP address.
    125 Mbps Upgrade
    Firmware Update - Version 1.53b10

    Note: Previous configuration utilities cannot be used with firmware version 1.53b10. After upgrading the firmware, it is necessary to uninstall your previous configuration utility and install the latest Configuration Utility Version 1.53b7.

    Note: If you are upgrading from version 1.41, your access point will retain its custom settings. Backup settings files from 1.41 firmware cannot be used to restore your settings after you have upgraded the firmware. It is recommended that you save your custom settings to a file after upgrading.

    Note: If you are upgrading from version 1.31 or older, your access point will reset to the factory default settings. Previous backup settings files from older firmware cannot be used to restore your settings. It is recommended to write down all of your custom settings before upgrading. After upgrading your firmware, reconfigure your Access Point, and then save your custom settings to a file.

    1. Download the usr5450_153b10 file located below.
    2. Click 153b10_upgrade_procedure.txt below and follow the upgrade procedures.
    153b10_upgrade_procedures.txt 2 KB 02-23-05
    usr5450_153b10.bin 896 KB 01-25-05
    1.53b10_release_notes.txt 1 KB 02-23-05
    Configuration Utility - Version v1.53b7

    Note: This utility can only be used in conjunction with firmware 1.53b10.

    1. Download the USR5450_utility_1.53b7.exe file located below.
    2. Double-click the USR5450_utility_1.53b7.exe file to start the installation process.
    3. Follow the prompts to complete the installation.
    USR5450_utility_1.53b7.exe 1.63 MB 01-05-05
    Archive
    Firmware Update - Version 1.41

    Note: Previous configuration utilities cannot be used with firmware version 1.41. After upgrading the firmware, it is necessary to uninstall your previous configuration utility and install the latest Configuration Utility Version v1.42b1.

    Note: Upgrading to version 1.41 below will reset your access point to the factory default settings, including your password. Previous backup settings files from older firmware cannot be used to restore your settings. It is recommended to write down all of your custom settings before upgrading.

    1. Download the USR5450_141.bin file located below.
    2. Click firmware1.41_upgrade_procedure.txt below and follow the upgrade procedures.
    firmware1.41_upgrade_procedures.txt 1.22 KB 04-22-04
    USR5450_141.bin 896 KB 03-22-04
    firmware1.41_release_notes.txt 1 KB 04-22-04
    Configuration Utility - Version v1.42b1

    Note: This utility can only be used in conjunction with firmware 1.41.

    1. Download the USR5450_Utility_1.42b1.exe file located below.
    2. Double-click the USR5450_Utility_1.42b1.exe file to start the installation process.
    3. Follow the prompts to complete the installation.
    USR5450_Utility_1.42b1.exe 1.63 MB 04-07-04
    Note: Firmware versions 1.19 and 1.31 require the use of configuration utility 4.01E.
    Firmware Update version 1.31

    Note: This firmware update provides support for the following Advanced Modes - AP Client, Bridging, Multi-Bridging, and Repeater.

    firmware_upgrade_procedure.txt 1.08 KB 09-30-03
    USR5450_131.bin 896 KB 09-30-03
    Original Firmware version 1.19
    firmware_upgrade_procedure.txt 1.08 KB 07-27-03
    USR5450_119.bin 896 KB 07-27-03
    Configuration Utility - Version USR04_4.01E
    utility_upgrade_procedure.txt 238 KB 07-29-03
    USR5450_APUtility_1.1E.exe 1.6 MB 07-29-03

    Cut the Cord and Go Cellular! Cellular Gateway Cellular Modems and Gateways make the M2M world go round. Learn all about Cellular

    Network TAPs Aggregation Tap Get your SPAN ports back and truly see into your network traffic. Start Tapping now!

    Share Telephone Lines Call Director Line Sharing Device Learn how you can save money by letting your modem, POS, fax and telephone all share one line. Learn more now!

    USRobotics News Stay on top of product releases, special offers, and the latest news by following us on Facebook and Twitter.
    facebook twitter

    Product Registration Activate your USRobotics product warranty online.

    Warranty Service Learn how to send your product in for warranty service.




    Electronic product documentation is provided as a courtesy to USRobotics customers. These are electronic versions of the original documentation. Some of the information contained within this documentation, including the support contact information, is subject to change.