Result Code Meanings and Sets

Result Code Meanings

Result Code Meaning
0/OK Command has been executed.
1/CONNECT Connection with another device.
2/RING Incoming ring detected.
3/NO CARRIER Carrier Detect has failed, or carrier has been dropped due to disconnect.
4/ERROR Command is invalid.
5/CONNECT 1200 Connection at reported rate. Same meaning for results of 2400 (10), 4800 (18), 7200 (20), 9600 (13), 12000 (21), 14400 (25), 16800 (43), 19200 (85), 21600 (91), 24000 (99), 26400 (103), 28800 (107), 31200 (151), 33600 (155), or 56000 (162) bps.
6/NO DIAL TONE Dial tone not detected during the default 2 seconds, set in Register S6.
7/BUSY Busy signal detect; modem hangs up.
8/NO ANSWER After waiting 5 seconds for an answer, modem hangs up; returned instead of NO CARRIER when the @ option is used.
11/RINGING The modem has dialed; remote phone line is ringing.
12/VOICE Voice answer at remote site; modem hangs up.
170/RING A Incoming distinctive ring detected.
171/RING B Incoming distinctive ring detected.
172/RING C Incoming distinctive ring detected.
173/RING D Incoming distinctive ring detected.
174/RING E Incoming distinctive ring detected.
Wait for another Dial Tone (W) Courier 56K Business Modem continues diaing as soon as it detects another dial tone. Requires X3 or higher.
Wait for an answer (@) Courier 56K Business Modem continues dialing when it detects 5 seconds of silence on the line. Requires X3 or higher.

 

Result Codes Sets for Xn Values

Result Codes X0 X1 X2 X3 X4 X5 X6 X7
0/OK x x x x x x x x
1/CONNECT x x x x x x x x
2/RING x x x x x x x x
3/NO CARRIER x x x x x x x x
4/ERROR x x x x x x x x
5/CONNECT 1200 x x x x x x x
6/NO DIAL TONE x x x x
7/BUSY x x x x x
8/NO ANSWER x x x x x
10/CONNECT 2400 x x x x x x x
11/RINGING x x x
12/VOICE x x
13/CONNECT 9600 x x x x x x x
18/CONNECT 4800 x x x x x x x
20/CONNECT 7200 x x x x x x x
21/CONNECT 12000 x x x x x x x
25/CONNECT 14400 x x x x x x x
43/CONNECT 16800 x x x x x x x
85/CONNECT 19200 x x x x x x x
91/CONNECT 21600 x x x x x x x
99/CONNECT 24000 x x x x x x x
103/CONNECT 26400 x x x x x x x
107/CONNECT 28800 x x x x x x x
151/CONNECT 31200 x x x x x x x
155/CONNECT 33600 x x x x x x x
170/RING A x x x x x x x
171/RING B x x x x x x x
172/RING C x x x x x x x
173/RING D x x x x x x x
174/RING E x x x x x x x
Functions
Wait for 2nd Dial Tone (W) x x x x x
Wait for Answer (@) x x x x x

 

 

New Connect Messages

The table below includes all new connect messages.