I am unable to communicate with the Wireless MAXg Bridge.

Possible Solution:

Your Wireless MAXg Bridge may not be responding. Try unplugging the power supply and then plugging it back in to restart the Bridge.

Possible Solution:

Your Wireless MAXg Bridge may not have received a valid IP address for your network. If the IP address is set to Dynamic, make sure you have the Bridge connected to a network device with DHCP enabled (i.e. router). If it is not connected to a network device with DHCP enabled, the Bridge will not receive an IP address and you will not be able to connect to it. If you use a static IP address for your Wireless MAXg Bridge, verify that the static IP address is in the same subnet as your computer’s IP address. Refer to the LAN chapter of the Web User Interface section in the User Guide for more information about changing the IP address.

Possible Solution:

Your Wireless MAXg Bridge may not be responding. Try restoring the factory default settings of the Bridge to reactivate it. If you restore the factory default settings, the Bridge will lose any custom settings. Press in and hold the RESET button for between five and ten seconds. If you made any custom configuration settings, you will need to make the changes again or restore your settings if you created a backup file.

Return to Troubleshooting page