Wireless USB Print Server User Guide

The U.S. Robotics Wireless USB Print Server User Guide uses scripting to display its information correctly. This browser either doesn’t support scripting or has scripting disabled. Please refer to your browser’s documentation for instructions on how to enable scripting.

The Wireless USB Print Server can be used with Netware and Unix if the printer is set up as a logical printer.

Select a Logical Printer No. This corresponds with the logical printer port that you wish to configure. You can choose either L1, L2, or L3. Click the Get Data button to show the current data for the selected logical printer.

Pre-string is the printer control string in hexadecimal characters to be sent to the printer before each print job. This string cannot exceed 15 characters.

Post-string is the printer control string in hexadecimal characters to be sent to the printer after each print job. This string cannot exceed 15 characters.

If the Convert LF to CR/LF checkbox is selected, LF (line feed) characters are changed to CR+LF (carriage return + line feed) characters.