The U.S. Robotics Wireless MAXg Range Extender uses scripting to display its data correctly. This browser either doesn’t support scripting or has scripting disabled. Please refer to your browser’s documentation for instructions on how to enable scripting.

x

Print this page
or press Ctrl+D

Tutorial

How do I add a new wireless client to my network?

Wireless

This section displays information about the range extender’s wireless network. It also lists the MAC addresses of the access points the range extender is configured to repeat. If an access point has a check mark () next to its MAC address, the access point has an active WDS link.

Refresh

Click the Refresh button at the bottom of the page to display the latest values.

Device

Name:

U.S. Robotics Wireless MAXg Range Extender (USR5441)

Firmware:

3.91.37.0.5 (Jul 13 2005)

Boot loader:

CFE 3.91.37.0.3

Wireless

Network name:

USR9550

Broadcast name:

Channel:

1

MAC address:

00:C0:49:F0:2A:77

Access point(s):

00:12:0E:2E:D2:96

Security

Method:

Wireless MAC filter:

LAN

IP address:

192.168.2.3

Subnet mask:

255.255.255.0

MAC address:

00:C0:49:F0:2A:76

Clients

MAC Address	Associated	Authorized