    
|
Interfaces
To monitor wired LAN and wireless LAN (WLAN) settings, navigate to Status > Interfaces on the access point you want to monitor.
Note
On a two-radio access point, current wireless settings for both Radio One and Radio Two are shown. On a one-radio access point, settings are shown for one radio.
This page displays the current settings of the U.S. Robotics Professional Access Point. It displays the Ethernet (Wired) Settings and the Wireless Settings.
Ethernet (Wired) Settings
The Internal interface includes the Ethernet MAC Address, IP Address, Subnet Mask, and Associated Network Wireless Name (SSID).
The Guest interface includes the MAC Address, VLAN ID, and Associated Network Wireless Name (SSID).
If you want to change any of these settings, click the "Configure" link.
Wireless Settings
The Radio Interface settings radio Mode, and Channel. Also shown here are MAC addresses (read-only) for internal and guest interfaces. (See Setting the Wireless Interface and Configuring Radio Settings for more information.)
If you want to change any of these settings, click the "Configure" link.
|
|
 |