This USRobotics User Guide uses scripting to display its information correctly. This browser either doesn't support scripting or has scripting disabled. Please refer to your browser's documentation for instructions on how to enable scripting.

DSL modem (also known as PPPoE)

Note: If your Internet connection uses PPPoE, you may need to contact your Internet Service Provider for the following information: User Name, Password and Service Name

Enter the User name and Password information, if required by your ISP:
Enter the connection information, as required by your ISP:

Disconnect if inactive for: Specify a timeout for your Internet connection to be disconnected if your Internet connection is not active.
Service name: The PPPoE Service Name is an ISP name or a class of service that is configured on the PPPoE server.
MRU: The MRU is the largest packet size the router will allow a computer on the network to receive. MRU stands for Maximum Receive Unit. Contact your ISP if you have any questions regarding what this number should be or if it is necessary. If your ISP does not instruct you to change this number, leave the default setting of 1492.
MTU: The MTU is the largest packet size the router will allow a computer on the network to send. MTU stands for Maximum Transmission Unit. Contact your ISP if you have any questions regarding what this number should be or if it is necessary. If your ISP does not instruct you to change this number, leave the default setting of 1492.