Welcome to 56K Information Access
Operating System Installation
and Limited Warranty >
56K Faxmodem User's Guide and Reference
Regulatory Information and Limited Warranty
Manufacturer s Declaration of Conformity
935 National Parkway
declares that this product conforms to the FCC s specifications:
Part 15, Class B:
Operation is subject to the following conditions:
1) this device may not cause harmful electromagnetic interference,
2) this device must accept any interference received including interference
that may cause undesired operations.
This equipment complies with Part 15 for Home and Office use.
Caution to the User:
The user is cautioned that any changes or modifications not expressly
approved by the party responsible for compliance could void the users
authority to operate the equipment.
FCC Part 68 Registration
This equipment complies with Part 68 of the FCC rules and the requirements
adopted by the ACTA. On the bottom of this equipment is a label that contains,
among other information, a product identifier in the format US:AAAEQ##TXXXX.
If requested, this number must be provided to the telephone company.
This equipment uses the following Universal Service Order Code (USOC)
A plug and jack used to connect this equipment to the premises wiring
and telephone network must comply with the applicable FCC Part 68 rules
and requirements adopted by the ACTA. A compliant telephone cord modular
plug is provided with this product. It is
designed to be connected to a compatible modular jack that is also compliant.
See this document for details.
The REN is used to determine the number of devices that may be connected
to a telephone line. Excessive RENs on a telephone line may result in
the devices not ringing in response to an incoming call. In most but not
all areas, the sum of RENs should not exceed five (5.0). To be certain
of the number of devices that may be connected to a line,as determined
by the total RENs, contact the local telephone company. For products approved
after July 23, 2001, the REN for this product is part of the product identifier
that has the format US:AAAEQ##TXXXX.The digits represented by ##are the
REN without a decimal point (e.g.,03 is a REN of 0.3).
If this equipment, U.S.Robotics 56K Faxmodem USB,causes harm to the telephone
network, the telephone company will notify you in advance that temporary
discontinuance of service may be required. But if advance notice is not
practical, the telephone company will notify the customer as soon as possible.
Also, you will be advised of your right to file a complaint with the FCC
if you believe it is necessary.
The telephone company may make changes in its facilities, equipment,operations
or procedures that could affect the operation of the equipment. If this
happens the telephone company will provide advance notice in order for
you to make necessary modifications to maintain uninterrupted service.
If the equipment is causing harm to the telephone network, the telephone
company may request that you disconnect the equipment until the problem
There are no serviceable parts in this equipment.
If your home has specially wired alarm equipment connected to the telephone
line, ensure the installation of this equipment does not disable your
alarm equipment. If you have questions about what will disable alarm equipment,
consult your telephone company or a qualified installer.
UL Listing/CUL Listing
This information technology equipment is UL Listed and C-UL Listed for
both the US and
Canadian markets respectively. Suggested cable type is 90-ohm USB cable
for the USB port, and standard telephone cable for the RJ-11 port, 26AWG.
The Telephone Consumer Protection Act of 1991 makes it unlawful for any
person to use a computer or other electronic device, including fax machines,
to send any message unless such message clearly contains in the margin
at the top or bottom of each transmitted page or on the first page of
the transmission, the date and time it is sent, an identification of the
business or other entity, or other individual sending the message, and
the telephone number of the sending machine or of such business, other
entity, or individual. (The telephone number provided may not be a 900
number or any other number for which charges exceed local or long-distance
transmission charges.) In order to program this information into your
modem, refer to the BVRP software on the CD-ROM that shipped with your
modem. If you are using a different communication software program, refer
to its manual.
Radio and Television Interference:
This equipment generates, uses,and can radiate radio frequency energy.
If this equipment is not installed and used in accordance with the manufacturers
instructions, it may cause interference to radio and television communications.
The modem has been tested and found to comply with the limits for a Class
B computing device in accordance with the specifications in Part 15 of
FCC rules, which are designed to provide reasonable protection against
such interference in a residential installation.
For Canadian Modem Users
Industry Canada (IC)
This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus set out in the interference-causing equipment
standard entitled Digital Apparatus, ICES-003 of Industry Canada.
Notice: This equipment meets the applicable
Industry Canada Terminal Equipment Technical Specifications. This is confirmed
by the registration number. The abbreviation, IC, before the registration
number signifies that registration was performed based on a Declaration
of Conformity indicating that Industry Canada technical specifications
were met. It does not imply that Industry Canada approved the equipment.
Notice:The Ringer Equivalence Number
(REN) for this terminal equipment is 0.1B. The REN assigned to each terminal
equipment provides an indication of the maximum number of terminals allowed
to be connected to a telephone interface. The termination on a interface
may consist of any combination of devices subject only to the requirement
that the sum of the Ringer Equivalence Numbers of all the devices does
not exceed five.
This device complies with the requirements of European Directive 1995/5/EC.
We, USRobotics Corporation of 935 National Parkway, Schaumburg, Illinois,
60173-5157, USA, declare under our sole responsibility that the USRobotics
56K Faxmodem USB to which this declaration relates, is in conformity with
the following standards and/or other normative documents:
We hereby declare that this product is in conformity to all the essential
requirements and other relevant provisions of Directive 1999/5/EC. The
conformity assessment procedure referred to in Article 10 (3) and detailed
in Annex II of Directive 1999/5/EC has been followed.
The ports on this modem have the following safety status:
- Telephone line connector = TNV-3.
- All other ports = Safety Extra Low Voltage (SELV)
- Network Compatibility Declaration
This equipment is designed to work satisfactorily on all European Union
PSTNs (Public Telephone Switched Networks).
This equipment is supplied with a suitable PSTN connector
for the country in which it was supplied. If it is required to use this
equipment on a different network to the one for which it was supplied,
the user is advised to contact the vendor for guidance regarding connection.
935 National Parkway
Schaumburg, Illinois, 60173
USRobotics Corporation Limited Warranty
1.0 GENERAL TERMS:
1.1 This Limited Warranty is extended only to the original end-user purchaser
(CUSTOMER) and is not transferable.
1.2 No agent, reseller, or business partner of USRobotics Corporation
(USRobotics) is authorised to modify the terms of this Limited Warranty
on behalf of USRobotics.
1.3 This Limited Warranty expressly excludes any product that has not
been purchased as new from USRobotics or its authorised reseller.
1.4 This Limited Warranty is only applicable in the country or territory
where the product is intended for use (As indicated by the Product Model
Number and any local telecommunication approval stickers affixed to the
1.5 USRobotics warrants to the CUSTOMER that this product will be free
from defects in workmanship and materials, under normal use and service,
for TWO (2) YEARS from the date of purchase from USRobotics or its
1.6 USRobotics sole obligation under this warranty shall be, at U.S.
ROBOTICS sole discretion, to repair the defective product or part with
new or reconditioned parts; or to exchange the defective product or part
with a new or reconditioned product or part that is the same or similar;
or if neither of the two foregoing options is reasonably available, U.S.
ROBOTICS may, at its sole discretion, provide a refund to the CUSTOMER
not to exceed the latest published USRobotics recommended retail purchase
price of the product, less any applicable service fees. All products or
parts that are exchanged for replacement will become the property of U.S.
1.7 USRobotics warrants any replacement product or part for NINETY
(90) DAYS from the date the product or part is shipped to Customer.
1.8 USRobotics makes no warranty or representation that this product
will meet CUSTOMER requirements or work in combination with any hardware
or software products provided by third parties.
1.9 USRobotics makes no warranty or representation that the operation
of the software products provided with this product will be uninterrupted
or error free, or that all defects in software products will be corrected.
1.10 USRobotics shall not be responsible for any software or other
CUSTOMER data or information contained in or stored on this product.
2.0 CUSTOMER OBLIGATIONS
2.1 CUSTOMER assumes full responsibility that this product meets CUSTOMER
specifications and requirements.
2.2 CUSTOMER is specifically advised to make a backup copy of all software
provided with this product.
2.3 CUSTOMER assumes full responsibility to properly install and configure
this product and to ensure proper installation, configuration, operation
and compatibility with the operating environment in which this product
is to function.
2.4 CUSTOMER must furnish USRobotics a dated Proof of Purchase (copy
of original purchase receipt from USRobotics or its authorised reseller)
for any warranty claims to be authorised.
3.0 OBTAINING WARRANTY SERVICE:
3.1 CUSTOMER must contact USRobotics Technical Support or an authorised
USRobotics Service Centre within the applicable warranty period to
obtain warranty service authorisation.
3.2 Customer must provide Product Model Number, Product Serial Number
and dated Proof of Purchase (copy of original purchase receipt from U.S.
ROBOTICS or its authorised reseller) to obtain warranty service authorisation.
3.3 For information on how to contact USRobotics Technical Support
or an authorised USRobotics Service Centre, please see the U.S ROBOTICS
corporate Web site at: www.usr.com
3.4 CUSTOMER should have the following information / items readily available
when contacting USRobotics Technical Support:
· Product Model Number
· Product Serial Number
· Dated Proof of Purchase
· CUSTOMER contact name & telephone number
· CUSTOMER Computer Operating System version
· USRobotics Installation CD-ROM
· USRobotics Installation Guide
4.0 WARRANTY REPLACEMENT:
4.1 In the event USRobotics Technical Support or its authorised U.S.
ROBOTICS Service Centre determines the product or part has a malfunction
or failure attributable directly to faulty workmanship and/or materials;
and the product is within the TWO (2) YEAR warranty term; and the CUSTOMER
will include a copy of the dated Proof of Purchase (original purchase
receipt from USRobotics or its authorised reseller) with the product
or part with the returned product or part, then USRobotics will issue
CUSTOMER a Return Material Authorisation (RMA) and instructions for the
return of the product to the authorised USRobotics Drop Zone.
4.2 Any product or part returned to USRobotics without an RMA issued
by USRobotics or its authorised USRobotics Service Centre will be
4.3 CUSTOMER agrees to pay shipping charges to return the product or part
to the authorised USRobotics Return Centre; to insure the product or
assume the risk of loss or damage which may occur in transit; and to use
a shipping container equivalent to the original packaging.
4.4 Responsibility for loss or damage does not transfer to USRobotics
until the returned product or part is received as an authorised return
at an authorised USRobotics Return Centre.
4.5 Authorised CUSTOMER returns will be unpacked, visually inspected,
and matched to the Product Model Number and Product Serial Number for
which the RMA was authorised. The enclosed Proof of Purchase will be inspected
for date of purchase and place of purchase. USRobotics may deny warranty
service if visual inspection of the returned product or part does not
match the CUSTOMER supplied information for which the RMA was issued.
4.6 Once a CUSTOMER return has been unpacked, visually inspected, and
tested USRobotics will, at its sole discretion, repair or replace,
using new or reconditioned product or parts, to whatever extent it deems
necessary to restore the product or part to operating condition.
4.7 USRobotics will make reasonable effort to ship repaired or replaced
product or part to CUSTOMER, at USRobotics expense, not later than
TWENTY ONE (21) DAYS after USRobotics receives the authorised CUSTOMER
return at an authorised USRobotics Return Centre.
4.8 USRobotics shall not be liable for any damages caused by delay
in delivering or furnishing repaired or replaced product or part.
5.1 THIRD-PARTY SOFTWARE: This USRobotics product may include or be
bundled with third-party software, the use of which is governed by separate
end-user license agreements provided by third-party software vendors.
This USRobotics Limited Warranty does not apply to such third-party
software. For the applicable warranty refer to the end-user license agreement
governing the use of such software.
5.2 DAMAGE DUE TO MISUSE, NEGLECT, NON-COMPLIANCE, IMPROPER INSTALLATION,
AND/OR ENVIRONMENTAL FACTORS: To the extent permitted by applicable law,
this USRobotics Limited Warranty does not apply to normal wear and
tear; damage or loss of data due to interoperability with current and/or
future versions of operating system or other current and/or future software
and hardware; alterations (by persons other than USRobotics or authorised
USRobotics Service Centres); damage caused by operator error or non-compliance
with instructions as set out in the user documentation or other accompanying
documentation; damage caused by acts of nature such as lightning, storms,
floods, fires, and earthquakes, etc. Products evidencing the product serial
number has been tampered with or removed; misuse, neglect, and improper
handling; damage caused by undue physical, temperature, or electrical
stress; counterfeit products; damage or loss of data caused by a computer
virus, worm, Trojan horse, or memory content corruption; failures of the
product which result from accident, abuse, misuse (including but not limited
to improper installation, connection to incorrect voltages, and power
points); failures caused by products not supplied by USRobotics; damage
cause by moisture, corrosive environments, high voltage surges, shipping,
abnormal working conditions; or the use of the product outside the borders
of the country or territory intended for use (As indicated by the Product
Model Number and any local telecommunication approval stickers affixed
to the product).
5.3 TO THE FULL EXTENT ALLOWED BY LAW, THE FOREGOING WARRANTIES AND REMEDIES
ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, TERMS, OR CONDITIONS,
EXPRESS OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR
OTHERWISE, INCLUDING WARRANTIES, TERMS, OR CONDITIONS OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, SATISFACTORY QUALITY, CORRESPONDENCE
WITH DESCRIPTION, AND NON-INFRINGEMENT, ALL OF WHICH ARE EXPRESSLY DISCLAIMED.
USRobotics NEITHER ASSUMES NOR AUTHORISES ANY OTHER PERSON TO ASSUME
FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION,
MAINTENANCE, WARRANTY, OR USE OF ITS PRODUCTS.
5.4 LIMITATION OF LIABILITY. TO THE FULL EXTENT ALLOWED BY LAW, USRobotics
ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED
IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL,
INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE
OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA, OR OTHER FINANCIAL
LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE,
USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF ITS PRODUCTS, EVEN IF U.S.
ROBOTICS OR ITS AUTHORISED RESELLER HAS BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND
OF THE PURCHASE PRICE PAID, AT USRobotics OPTION. THIS DISCLAIMER OF
LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN
SHALL FAIL OF ITS ESSENTIAL PURPOSE.
6.0 DISCLAIMER: Some countries, states, territories or provinces do not
allow the exclusion or limitation of implied warranties or the limitation
of incidental or consequential damages for certain products supplied to
consumers, or the limitation of liability for personal injury, so the
above limitations and exclusions may be limited in their application to
CUSTOMER. When the implied warranties are not allowed by law to be excluded
in their entirety, they will be limited to the TWO (2) YEAR duration of
this written warranty. This warranty gives CUSTOMER specific legal rights,
which may vary depending on local law.
7.0 GOVERNING LAW: This Limited Warranty shall be governed by the laws
of the State of Illinois, U.S.A. excluding its conflicts of laws principles
and excluding the United Nations Convention on Contracts for the International
Sale of Goods.
935 National Parkway
Schaumburg, IL, 60173