This USRobotics User Guide uses scripting to display its information correctly. This browser either doesn’t support scripting or has scripting disabled. Please refer to your browser’s documentation for instructions on how to enable scripting.

Features

Physical Features

Power Switch
LEDs
Line to wall jack
Line to telephone
DIP switches
Serial port
Power port
Volume dial

LEDs

LED	Name	State	Condition
AA	Auto Answer	On	Answering a call - Or - Register S0 is set to 1 or higher
		Off	Modem is originating a call
		Flashing	Incoming call
CD	Carrier Detect	On	Receiving carrier signal from remote modem - Or - CD override is ON (&C0)
RD	Received Data	Flashing	Sending or passing data with remote modem
SD	Send Data	On	Receiving a DTR signal from computer - Or - DTR override is set to On (&D0)
TR	Terminal Ready	On	DTR override is on. - Or - DTR override is set to On (&D0)
CS	Clear to Send	On	Modem is on and ready to send data
ARQ/FAX	Error Control	On	Successfully established an error control connection - Or - Modem is set to &M4 or &M5 and successfully established an error control connection
ARQ/FAX	Error Control	Flashing	Transmitting data to remote modem - Or - Modem is in fax mode

DIP Switches

Switch	Default	Function
1 - Data Terminal Ready (DTR) Override	OFF	OFF : Normal DTR operations. Computer must provide DTR signal for the modem to accept commands; dropping DTR terminates a call.
		ON : Modem ignores DTR (Override).
2 - Verbal/Numeric Result Codes	OFF	OFF : Verbal (word) results.
		ON : Numeric results.
3 -Result Code Display	ON	OFF : Suppresses result codes.
		ON : Enables result codes.
4 - Command Mode Local Echo Suppression	OFF	OFF : Displays keyboard commands.
		ON : Suppresses echo.
5 - Auto Answer Suppression	ON	OFF : Modem answers on first ring, or higher if specified in NVRAM.
		ON : Disables auto answer.
6 - Carrier Detect (CD) Override	OFF	OFF : Modem sends CD signal when it connects with another modem, drops CD on disconnect.
		ON : CD always ON (Override).
7 - Power-on and ATZ Reset Software Defaults	OFF	OFF : Loads Y0-Y4 configuration from user-defined nonvolatile memory (NVRAM).
		ON : Loads &F0 Generic template from Read Only Memory (ROM).
8 - AT Command Set Recognition	ON	OFF : Disables command recognition (dumb mode).
		ON : Enables recognition (smart mode).

Modulation Schemes

ITU-T V.92 *
ITU-T V.90
x2TM technology *
ITU-T V.34+
ITU-T V.34
ITU-T V.32bis
ITU-T V.32
ITU-T V.22bis
ITU-T V.22
ITU-T V.23
Bell 212A

Error Control and Data Compression Schemes

ITU-T V.42
ITU-T V.42bis
MNP 2-5
ITU-T V.44 (on select models)

Fax Modulation Schemes

ITU-T V.17
ITU-T V.29
ITU-T V.27ter
ITU-T V.21

Fax Standards

EIA 578 Class 1 FAX
EIA 592 Class 2.0 FAX

Downstream Link Rates (V.90/V.92)

56000, 54666, 53333, 52000, 50666, 49333, 48000, 46666, 45333, 44000, 42666, 41333, 40000, 38666, 37333, 36000, 34666, 33333, 32000, 30666, 29333, 28000

Upstream Link Rates (V.92-PCM Upstream)

48000, 46666, 45333, 44000, 42666, 41333, 40000, 38666, 37333, 36000, 34666, 33333, 32000, 30666, 29333, 28000

Upstream Link Rates (V.90)

31200, 28800, 26400, 24000, 21600, 19200, 16800, 14400, 12000, 9600, 7200, 4800

V.34+ Link Rates

33600, 31200, 28800, 26400, 24000, 21600, 19200, 16800, 14400, 12000, 9600, 7200, 4800

V.32bis Link Rates

14400, 12000, 9600, 7200, 4800

Additional Link Rate

2400

Fax Link Rates

14400, 12000, 9600, 7200, 4800, 2400

DTE Rates

115200, 57600, 38400, 19200, 9600, 2400

* On select models