Contents:
About the USRobotics USB ADSL Modem
Modem Installation and Configuration for Windows 98 FE/98 SE/2000/Me
Configuring the TCP/IP Settings
Customizing USB ADSL Modem Settings
Product Specifications for USB ADSL Modem >
USB ADSL Modem User Guide
Product Specifications for USB ADSL Modem:
Standard Conformance
Basic ADSL: ANSI T1.415 Issue II (full rate ADSL), ITU G.992.1 (G.dmt), ITU G.992.2 (G.lite), G.994.1 (G.hs)
Transport Protocols: RFC 1577 (IP/ATM), RFC 2364 (PPP/ATM)
ATM Attributes: ATM Transmission Convergence, ATM Framing (with traffic shaping), ATM SAR/AAL5, ATM Forum UNI3.1 signalling, ATM UBR Service Class
ADSL Service
Service Type: Full rate Discrete Multi-Tone ADSL (G.dmt), and Splitterless
ADSL (G.lite)
Data Rate: G.dmt: 8Mbps (downstream), 1Mbps (upstream) G.lite: 1.5Mbps (downstream),
512Kbps (upstream)
Media Type: Simultaneous data/voice (can coexist with HPNA)
Service Provider: Digital Subscriber Line Access Multiplexer (DSLAM)
Media Connection: USB cable connection to PC - 90-ohm shielded USB cable, max length 5 m (16ft) RJ-11 phone wire connection to ADSL provider
PC Requirements
Host Interface: USB Specification 1.1 or up
System Requirements:
- A PC and Windows 98 FE, 98 SE, Me or 2000 operating system.
- 32 MB of RAM and 10 MB of hard disk space (memory extensive applications may require more RAM)
- Pentium 100 MHz (minimum)
Physical Characteristics
Port: Upstream: 1 USB Type B, USB spec. 1.1 differential and bi-directional,
12 Mbps (high-speed device)
Downstream: RJ-11 Phone wire connection to ADSL service provider
LEDs: Power, Data
Dimensions: Width = 6.134, Depth = 4.596, Height = 1.379
Weight: 5.8 oz.
Input: +5VDC, 500mA (maximum) (bus powered from USB host controller or hub)
Power
Consumption: 2.5 watt maximum (BUS powered/USB powered)
Environmental
Temperature: 0 to 50 degrees Celsius
Humidity: up to 95%
