The USRobotics Wireless ADSL2+ Router User Guide uses scripting to display its information correctly. This browser either doesn’t support scripting or has scripting disabled. Please refer to your browser’s documentation for instructions on how to enable scripting.

Routing Table

Flags: Indicates the route status.

C: Direct connection on the same subnet.

S: Static route.

R: RIP (Routing Information Protocol) assigned route.

I: ICMP (Internet Control Message Protocol) Redirect route.
Network Address: Destination IP address.
Netmask: The Sub Network Mask associated with the destination. This is a template that identifies the address bits in the destination address used for routing to specific subnets. Each bit that corresponds to a "1" is part of the subnet mask number; each bit that corresponds to "0" is part of the host number.
Gateway: The IP address of the router at the next hop to which frames are forwarded.
Interface: The local interface through which the next hop of this route is reached.
Metric: When a router receives a routing update that contains a new or changed destination network entry, the router adds 1 to the metric value indicated in the update and enters the network in the routing table.