Remote Management

By default, management access is only available to users on your local network. However, you can also manage the Wireless ADSL2+ Router from a remote host by entering the IP address of a remote computer on this screen.

  1. Select the Enabled box, and enter the IP address of the Host Address.

    System - Remote Management

    For remote management via WAN IP address, you need to connect using port 8080. Simply enter the WAN IP address followed by ":8080," for example: 123.456.78.9:8080

Note: If you enable Remote Management and do not change the IP address from the default "0.0.0.0", any remote host will be able to access and manage the Wireless ADSL2+ Router.

  1. Click SAVE SETTINGS.