This USRobotics User Guide uses scripting to display its information correctly. This browser either doesn’t support scripting or has scripting disabled. Please refer to your browser’s documentation for instructions on how to enable scripting.

The USRobotics Wireless ADSL2+ Router lets you share your ADSL2+ Internet service among multiple users. Delivering wireless speeds up to 54 Mbps and ADSL2+ download speeds up to 24 Mbps, this router has wireless encryption and filtering options, as well as a SPI firewall. The router supports up to 253 Ethernet devices (with additional hubs/switches) and is compatible with 802.11g and 802.11b products.

System Requirements

A computer with an Ethernet adapter installed
An HTML 4.01-compliant Web Browser with JavaScript enabled
For wireless connections to the router, a 802.11b/g compatible wireless adapter

Product Views

Front

Symbol	Name	State	Condition
	Power	Off	Not receiving power.
	Power	Solid	Receiving power.
	WLAN	Off	Wireless connection is disabled.
		Solid	Wireless connection is enabled.
		Flashing	Sending and receiving data.
	WAN	Off	No Internet connection is established.
		Solid	Internet Connection is established.
		Flashing	Sending and receiving data.
	ADSL	Off	No ADSL connection.
		Solid	ADSL link is achieved.
		Flashing	ADSL link is being established.
	LAN	Off	No LAN connection.
		Solid	LAN link is achieved.
		Flashing	Sending and receiving data.

Back

Item	Function
ADSL	Connects your router to your ADSL line.
LAN	Connects your router to a computer via a wired connection.
Reset	Reboots your router or restores your router to the factory default settings. To reboot your router without changing your current settings, press and hold the Reset button for 1 full second. To restore your router to the factory default settings, press and hold the Reset button for 10 seconds.
9VDC	Connects the power adapter to your router.

Default Values

Use the default values for the router if you did not change them during installation, or if you have restored the factory default settings. The Wireless ADSL2+ Router has the following default values:

IP Address: 192.168.1.1
User name: admin
Password: admin

Note: If you complete the installation steps in this guide, you will change the default password of the router.

R46.1870.00
rev 1.2 8/07