Problem: I cannot print to a network printer attached to my USR9108 Wireless MAXg ADSL2+ Gateway in Windows XP/2000.
Possible Solution:
Ensure that your printer is installed correctly and powered on.
Possible Solution:
Check that your printer has sufficient ink and paper. A printer connected to the print server cannot send its status to your computer.
Possible Solution:
Reboot the router by unplugging the power cord. Wait at least 30 seconds before plugging it in again. This will clear the print queue of any pending documents.
Possible Solution:
- Windows XP Users: Click Windows Start and then Printers and Faxes.
- Right-click on printer_name on http://192.168.1.1:1631 and click Properties.
- Click the Advanced tab, make sure that Enable advanced printing features is disabled, and then click Print Processor.
- For Default data type, select RAW, and click OK.
- Click Apply, then click OK.
Windows 2000 Users: Click Windows Start, Settings, and then Printers.
