Soporte


This page has been designed for printability. To print this document, click the Print button on your browser's toolbar. When you are finished, click the Close Window button located at the upper-right or bottom of the page to close this window and return to the previous page.

Changing the Channel on your USR9108 and USR9108A.

To change the channel that your 9108 transmits on please follow these simple steps. It is advisable to perform the change whilst connected to the device via an ethernet cable.

  1. Type http://192.168.1.1 into your web browser address line to log into the 9108. (If you have changed the default IP address, please enter your own)
  2. Enter your user name and password.
  3. Once logged in, select the Wireless tab followed by Advanced Settings.
  4. You can alter the channel number using the drop down menu labelled Channel.
  5. Press Apply

The Wireless Channel has now been changed.

Was this FAQ helpful? (1 = not helpful, 5 = very helpful)
1   2   3   4   5  
 
Did it resolve your problem?
Yes Si   No   Not sure (haven't tried it yet)  
 
Additional Comments (255 characters maximum)

Close Window