Soporte


This page has been designed for printability. To print this document, click the Print button on your browser's toolbar. When you are finished, click the Close Window button located at the upper-right or bottom of the page to close this window and return to the previous page.

Changing your ISP user name and password on the USR9114.

If you wish to change the ISP (Internet Service Provider) settings on an established 9114 due to changing ISP, please follow these simple steps. It is advisable to perform the change whilst connected to the device via an ethernet cable.

  1. Type http://192.168.1.1 into your web browser address line to log into the 9114. (If you have changed the default IP address, please enter your own)
  2. Enter your user name and password.
  3. Once logged in, select the Internet tab followed by Wan Setup.
  4. Select the appropriate Edit button. From here you will be able to enter all of the settings supplied to you by your ISP including changing your login and password.
  5. When finished press Apply followed by Finish

The modem will reboot and your ISP settings will have been changed.

Was this FAQ helpful? (1 = not helpful, 5 = very helpful)
1   2   3   4   5  
 
Did it resolve your problem?
Yes Si   No   Not sure (haven't tried it yet)  
 
Additional Comments (255 characters maximum)

Close Window