This page has been designed for printability. To print this document, click the Print button on your browser's toolbar. When you are finished, click the Close Window button located at the upper-right or bottom of the page to close this window and return to the previous page.


CommWorks Corporation and USRobotics Corporation have identified an issue in public release 3.5.12 of the HiPer DSP and DSP Multispan server code.


Symptom:
The modem connects but hangs up right away.

Modem Work Around:
Add "+PIG=1" to the modem's "Extra Settings" or, alternatively, to the modem Init String.

Solution:
Ask your ISP to upgrade their CommWorks HiPer DSP or DSP Multispan V.92 code to version 3.5.103 or higher. Most ISPs are not aware of CommWorks' Engineering Releases unless they have experienced a problem and have talked to their CommWorks Support Affiliate so you may have to show your ISP this message.

CommWorks is preparing a public release for HiPer DSP and DSP Multispan in late October. The upcoming release will include this fix and many others. If you choose the "Modem Work Around" above, you can still encourage your ISP to upgrade to the upcoming Public Release.

Was this FAQ helpful? (1 = not helpful, 5 = very helpful)
1   2   3   4   5  
 
Did it resolve your problem?
Yes Yes   No   Not sure (haven't tried it yet)  
 
Additional Comments (255 characters maximum)

Close Window