This page has been designed for printability. To print this document, click the Print button on your browser's toolbar. When you are finished, click the Close Window button located at the upper-right or bottom of the page to close this window and return to the previous page.


Download and run the Modem Identification Wizard.

Note: If you already have ControlCenter software installed, you can use its Instant Update feature to ensure that your modem has the latest code.

Step 1
Download the Modem Identification Wizard.

Step 2
Disconnect from your Internet Service Provider.

Step 3
Find the downloaded miu.exe file on your computer. Double-click this to install the Modem Identification Wizard. Once the wizard is installed, double-click the Modem Identification Wizard icon to run the program.

Step 4
Click Next on the Welcome screen.

Step 5
When the wizard asks you to select a modem, choose the appropriate USRobotics modem, and click the Details button.

Step 6
The modem's Firmware revision will appear near the bottom of the screen, outlined in the screenshot below. Click Print or write the number on a piece of paper. Click Cancel.

Flash rev is your firmware version

Was this FAQ helpful? (1 = not helpful, 5 = very helpful)
1   2   3   4   5  
 
Did it resolve your problem?
Yes Yes   No   Not sure (haven't tried it yet)  
 
Additional Comments (255 characters maximum)

Close Window