This page has been designed for printability. To print this document, click the Print button on your browser's toolbar. When you are finished, click the Close Window button located at the upper-right or bottom of the page to close this window and return to the previous page.

I cannot locate the MAXg Configuration Utility

If you do not see the MAXg Configuration Utility in your system tray, follow the instructions below to locate the utility and then enable the system tray icon.

  1. Windows XP Users: Click Windows Start and then Control Panel.
  2. Windows 95/98/Me/2000 Users: Click Windows Start, Settings, and then Control Panel.

  3. Windows XP Users: Click Switch to Classic View.
  4. Note: If you do not see Switch to Classic View, but rather Switch to Category View, continue to step 3.

  5. Double-click the USRobotics MAXg Configuration Utility icon.
  6. Select the box labeled Show wireless icon in systray. Click Apply to save your settings.
  7. Congratulations, you have sucessfully located the USRobotics MAXg Configuration Utility and enabled the system tray icon.

Was this FAQ helpful? (1 = not helpful, 5 = very helpful)
1   2   3   4   5  
Did it resolve your problem?
Yes Yes   No   Not sure (haven't tried it yet)  
Additional Comments (255 characters maximum)

Close Window