This page has been designed for printability. To print this document, click the Print button on your browser's toolbar. When you are finished, click the Close Window button located at the upper-right or bottom of the page to close this window and return to the previous page.

Changing the Channel on your USR5453 or USR5453A.

To change the channel that your 5453 transmits on please follow these simple steps. It is advisable to perform the change whilst connected to the device via an ethernet cable.

  1. Discover the 5453 using Kick Start on your installation CD or type into your web browser address line to log into the 5453. (If you have changed the default IP address, please enter your own)
  2. Enter your user name and password.
  3. Once logged in, expand the Advanced tab.
  4. In the Wireless Settings sub section you can alter the channel number using the drop down menu labelled Channel.
  5. Press Update

The Wireless Channel has now been changed.

Was this FAQ helpful? (1 = not helpful, 5 = very helpful)
1   2   3   4   5  
Did it resolve your problem?
Yes Yes   No   Not sure (haven't tried it yet)  
Additional Comments (255 characters maximum)

Close Window