This page has been designed for printability. To print this document, click the Print button on your browser's toolbar. When you are finished, click the Close Window button located at the upper-right or bottom of the page to close this window and return to the previous page.

Changing the SSID on your USR5455.

The SSID (Service Set Identifier) is the Wireless Network Name that your 5455 transmits into the air and it is recommended that change it from default. It is also advisable to perform the change whilst connected to the device via an ethernet cable.

  1. Type into your web browser address line to log into the 5455. (If you have changed the default IP address, please enter your own)
  2. Enter your user name and password.
  3. Once logged in, select the Wireless tab.
  4. Change the Network Name to a SSID of your choice.
  5. Press Save

The SSID (Wireless Network Name) has now been changed.

Was this FAQ helpful? (1 = not helpful, 5 = very helpful)
1   2   3   4   5  
Did it resolve your problem?
Yes Si   No   Not sure (haven't tried it yet)  
Additional Comments (255 characters maximum)

Close Window