Support


This page has been designed for printability. To print this document, click the Print button on your browser's toolbar. When you are finished, click the Close Window button located at the upper-right or bottom of the page to close this window and return to the previous page.

Changing the Channel on your USR5463.

To change the channel that your 5463 transmits on please follow these simple steps. It is advisable to perform the change whilst connected to the device via an ethernet cable.

  1. Type http://192.168.2.1 into your web browser address line to log into the 5463. (If you have changed the default IP address, please enter your own)
  2. Enter your user name and password.
  3. Once logged in, select the Home Network Settings tab.
  4. In the Wireless sub menu followed by Channel and SSID .
  5. You can alter the channel number using the drop down menu labelled Wi-Fi Channel number.
  6. Press Save Settings

The Wireless Channel has now been changed.

Was this FAQ helpful? (1 = not helpful, 5 = very helpful)
1   2   3   4   5  
 
Did it resolve your problem?
Yes Yes   No   Not sure (haven't tried it yet)  
 
Additional Comments (255 characters maximum)

Close Window