This page has been designed for printability. To print this document, click the Print button on your browser's toolbar. When you are finished, click the Close Window button located at the upper-right or bottom of the page to close this window and return to the previous page.
Windows 98SE/Me USB Printer Installation
A USB printer can be connected to the Wireless MAXg Router and used as a network printer if you are using an operating system that supports printing to an Internet Printing Protocol (IPP)-based printer. Windows 98SE and Windows Me operating systems require that Internet Printing Services be installed in order to utilize the print server function of the USR5465.
Step One: Internet Print Services Installation
Windows 98 Users
Windows Me Users
Step Two: Local Printer Installation
Note: If your printer and printer software is already installed on your computer, skip to Step Three: Print Server Configuration.
Before configuring your printer on the print server, it is important to install it on your computer using the drivers provided by the printer manufacturer.
Step Three: Print Server Configuration
Note: You will not be prompted to login the first time you connect to the MAXg Router's Web User Interface. During the Setup Wizard procedure, you will be prompted to create a user name and password to log in to the router. If you create a user name and password, you will need to use these whenever you want to log in to the Wireless MAXg Router. The user name and password are case sensitive.
Note: Perform the following steps to set up your printer. This procedure must be performed on every computer on the network.
Note: The URL information is case sensitive and must be entered exactly as it is listed on the Printer location section on the router's Status page.
Step Four: Verify the printer's connectivity