This page has been designed for printability. To print this document, click the Print button on your browser's toolbar. When you are finished, click the Close Window button located at the upper-right or bottom of the page to close this window and return to the previous page.
How to set up a printer with USR808700:
Connect the printer to the USR808700 (Serial ATA 4-Drive NAS) by using a USB cable. The product immediately recognizes the new peripheral device just connected; the fact that USB led is turned off is correct. In order to check that the printer has been correctly connected, you can go to the 8700 user interface, then click on advanced and then on USB (see images). All the devices connected by a USB cable will then be shown on this page.
To set up the printer and verify if it is really connected to the local network, please follow these instructions:
After having executed the previous steps, the printer is ready for use.