Assistenza


Questa pagina č predisposta per la stampa. Per stampare questo documento, clicca sul tasto stampa della barra del tuo browser. Al termine, clicca sul tasto chiudi, situato in alto a destra o in fondo alla pagina, per chiudere la finestra e tornare alla pagina precedente.


Problem: I cannot print to a network printer attached to my USR9108 Wireless MAXg ADSL2+ Gateway in Windows XP/2000.

Possible Solution:

Ensure that your printer is installed correctly and powered on.

Possible Solution:

Check that your printer has sufficient ink and paper. A printer connected to the print server cannot send its status to your computer.

Possible Solution:

Reboot the router by unplugging the power cord. Wait at least 30 seconds before plugging it in again. This will clear the print queue of any pending documents.

Possible Solution:

  1. Windows XP Users: Click Windows Start and then Printers and Faxes.
  2. Windows 2000 Users: Click Windows Start, Settings, and then Printers.

  3. Right-click on printer_name on http://192.168.1.1:1631 and click Properties.
  4. Click the Advanced tab, make sure that Enable advanced printing features is disabled, and then click Print Processor.
  5. For Default data type, select RAW, and click OK.
  6. Click Apply, then click OK.

Queste FAQ (Domande Frequenti) ti sono state d’aiuto? (1 = nessun aiuto, 5 = grande aiuto)
1   2   3   4   5  
 
Ti hanno permesso di risolvere il problema?
Si   No   Non so (non ho ancora provato)  
 
Commento facoltativo (255 caratteri al massimo)

Chiudi finestra