This page has been designed for printability. To print this document, click the Print button on your browser's toolbar. When you are finished, click the Close Window button located at the upper-right or bottom of the page to close this window and return to the previous page.

Changing the SSID on your USR9108 and USR9108A.

The SSID (Service Set Identifier) is the Wireless Network Name that your 9108 transmits into the air and it is recommended that change it from default. It is also advisable to perform the change whilst connected to the device via an ethernet cable.

  1. Type into your web browser address line to log into the 9108. (If you have changed the default IP address, please enter your own)
  2. Enter your user name and password.
  3. Once logged in, select the Wireless tab followed by Setup.
  4. Change the Network Name to a SSID of your choice.
  5. Press Apply

The SSID (Wireless Network Name) has now been changed.

Was this FAQ helpful? (1 = not helpful, 5 = very helpful)
1   2   3   4   5  
Did it resolve your problem?
Yes Yes   No   Not sure (haven't tried it yet)  
Additional Comments (255 characters maximum)

Close Window