This page has been designed for printability. To print this document, click the Print button on your browser's toolbar. When you are finished, click the Close Window button located at the upper-right or bottom of the page to close this window and return to the previous page.

Changing your ISP user name and password on the USR9110.

If you wish to change the ISP (Internet Service Provider) settings on an established 9110 due to changing ISP, please follow these simple steps. It is advisable to perform the change whilst connected to the device via an ethernet cable.

  1. Type into your web browser address line to log into the 9110. (If you have changed the default IP address, please enter your own)
  2. Enter your user name and password.
  3. Once logged in, select the Wan tab followed by ATM PVC.
  4. Select VC1 (if this is the connection that you wish to change)
  5. You will now see all of the ISP settings including Username and Password
  6. Press Save Settings

The modem will reboot and your ISP settings will have been changed.

Was this FAQ helpful? (1 = not helpful, 5 = very helpful)
1   2   3   4   5  
Did it resolve your problem?
Yes Yes   No   Not sure (haven't tried it yet)  
Additional Comments (255 characters maximum)

Close Window