Támogatás


This page has been designed for printability. To print this document, click the Print button on your browser's toolbar. When you are finished, click the Close Window button located at the upper-right or bottom of the page to close this window and return to the previous page.

How do I configure a VPN connection in OSX?

  1. In the main toolbar, click Go and then Applications.



  2. In the Applications window, double-click Internet Connect.




  3. In the upper right section of the Internet Connect window, click VPN (PPTP).




  4. Select Edit Configurations from the Configuration drop-down list.



  5. In the Description field, type in a name for your connection. In the Server Address field, type in the VPN server's IP address. In the Account Name field, type in your VPN user name. By default Authentication is set to Use Password. If your VPN uses RSA SecurID, select RSA SecurID.
  6. Note: By default, Encryption is set to Automatic (128-bit or 40-bit) and can be adjusted, if necessary.



  7. Click OK to complete the VPN configuration.




  8. Click Connect to begin a VPN session.


Was this FAQ helpful? (1 = not helpful, 5 = very helpful)
1   2   3   4   5  
 
Did it resolve your problem?
Yes Yes   No   Not sure (haven't tried it yet)  
 
Additional Comments (255 characters maximum)

Close Window