Serwis


This page has been designed for printability. To print this document, click the Print button on your browser's toolbar. When you are finished, click the Close Window button located at the upper-right or bottom of the page to close this window and return to the previous page.


How do I set up a printer?

  1. Login to the Web User Interface by typing the uShare's IP address in the address bar of your web browser and entering your login information when prompted.
  2. Connect your USB printer to USB printer port on the uShare™ Mini NAS Adapter.
  3. Install the printer driver on your computer(s). To use a printer attached to the uShare™ Mini NAS Adapter, the printer drivers need to be installed locally on computer(s).
  4. After printer driver installation, Click Windows Start > Setting > Printer and Faxes > Add a printer > Next.
  5. In the Add Printer Wizard, select Local printer and Click Next.
  6. Select Create a new port type of port:, then select Standard TCP/IP Port, and Click Next.
  7. Enter IP address of your uShare™ Mini NAS Adapter and Click Next.
  8. Select Custom and go to Settings. Click Next.
  9. Select LPR for the protocol, and enter a queue name (example: LRxxx) and select LPR byte enable.
  10. Click OK to save the port setting.
  11. Click Finish.

 

Was this FAQ helpful? (1 = not helpful, 5 = very helpful)
1   2   3   4   5  
 
Did it resolve your problem?
Yes Yes   No   Not sure (haven't tried it yet)  
 
Additional Comments (255 characters maximum)

Close Window