About the 22 Mbps Wireless PC Card, PCI Adapter, and Access Point
Network Configuration and Planning
Adapter Installation and Configuration for Windows 98 SE/2000/Me/XP
22 Mbps Wireless Configuration
Product Specifications for
22 Mbps Wireless PC Card and PCI Adapter
Product Specifications for 22 Mbps Wireless Access Point
USRobotics Corporation Limited Warranty
Federal Communications Commission Statement >
22 Mbps Wireless PC Card, PCI Adapter, and Access
Point User Guide
FCC Declaration of Conformity
These devices comply with FCC Rules Part 15. Operation is subject to the
following two conditions:
These devices may not cause harmful interference.
These devices must accept any interference received, including interference
that may causeundesired operation.
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy. If this equipment is not installed and
used in accordance with the manufacturer's instructions, it may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
The use of shielded cables for connection of the monitor to the graphics
card is required to assure compliance with FCC regulations. Modifications
to these devices not expressly approved by the party responsible for compliance
could void the user's authority to operate this equipment.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and operated
with minimum distance 20 cm between the radiator and your body.
Industry Canada Statement
This equipment complies with the Industry Canada Spectrum Management and
Telecommunications policy, RSS-210, standard Low Power License-Exempt
Radio Communication Devices.
Operation is subject to the following two conditions:
1.This device may cause interference.
2.This device must accept any interference, including interference that
may cause undesired operation of the device.
UL Listing/CUL Listing
For external devices:
This information technology equipment is UL-Listed and CUL Listed or CSA-Certified
for the uses described in the users guide.
For internal devices:
This information technology is UL-Listed and CUL-Listed for use with UL-Listed
personal computers that have a users guide detailing user installation
of card accessories.
We, USRobotics Corporation of 935 National Parkway, Schaumburg, Illinois,
60173-5157,USA, declare under our sole responsibility that the USRobotics
22 Mbps Wireless Access Point, 22 Mbps Wireless PC Card, and 22 Mbps Wireless
PCI Adapter, to which this declaration relates is in conformity with the
following standards and/or other normative documents:
EN61000-3-2 (USR2249 only)
EN61000-3-3 (USR2249 only)
We hereby declare that this product is in conformity to all the essential
requirements of Directive 1999/5/EC. The conformity assessment procedure
referred to in Article 10(3) and detailed in Annex II of Directive 1999/5/EC
has been followed.
This product can be used in the following countries:
Germany, Austria, Belgium, Switzerland, Netherlands, Luxembourg, Italy,
France, UK, Russia, Spain, and Sweden
Manufacturer's Disclaimer Statement
The information in this document is subject to change without notice
and does not represent a commitment on the part of the vendor. No warranty
or representation, either expressed or implied, is made with respect to
the quality, accuracy or fitness for any particular purpose of this document.
The manufacturer reserves the right to make changes to the content of
this document and/or the products associated with it at any time without
obligation to notify any person or organisation of such changes. In no
event will the manufacturer be liable for direct, indirect, special, incidental
or consequential damages arising out of the use or inability to use this
product or documentation, even if advised of the possibility of such damages.
This document contains materials protected by copyright. All rights are
reserved. No part of this manual may be reproduced or transmitted in any
form, by any means or for any purpose without expressed written consent
of its authors. Product names appearing in this document are mentioned
for identification purchases only. All trademarks, product names or brand
names appearing in this document are registered property of their respective