The does not find the .

  1. Click Detect to rescan the network.

  2. If the locator still does not find the access point, look at the client list for the networking device that is connected to the access point. Refer to the device's documentation to find out how to view the client list.

  3. In the client list, find the LAN MAC address shown on the bottom of the access point and note the IP address associated with that MAC address. This is the IP address of the access point.

  4. Start a Web browser, type the IP address of the access point, and press ENTER.

  5. Verify that the connection information is correct for the network to which the access point is connected.

Return to Troubleshooting page