USR5463 Wireless Router User Guide

The USRobotics Wireless Router User Guide uses scripting to display its information correctly. This browser either doesn’t support scripting or has scripting disabled. Please refer to your browser’s documentation for instructions on how to enable scripting.

I cannot ping the router from the attached LAN.

Solution 1:

Verify that the IP addresses are properly configured. For most applications, you should use the Wireless Router's DHCP function to dynamically assign IP addresses to hosts on the attached LAN.

However, if you manually configure IP addresses on the LAN, verify that the same network address (network component of the IP address) and subnet mask are used for both the Wireless Router and any attached LAN devices.

Solution 2:

Be sure the device you want to ping (or from which you are pinging) has been configured for TCP/IP. By default, the router gets an IP address of 192.168.2.1 and assigns IP addresses in the range 192.168.2.100–192.168.2.199