Welcome to 56K Information Access

Product Features >

Installation for All Operating Systems


Technical Reference


Regulatory Information

Limited Warranty

56K Faxmodem User's Guide and Reference

Product Features

Modulation Schemes

ITU-T V.92
ITU-T V.90
ITU-T V.34 +
ITU-T V.34
ITU-T V.32 bis
ITU-T V.32
ITU-T V.22 bis
ITU-T V.22
ITU-T V.23
Bell 212A
ITU-T V.21

Error Control and Data Compression Schemes

ITU-T V.42
ITU-T V.42 bis
MNP 2-5

Fax Modulation Schemes

ITU-T V.17
ITU-T V.29
ITU-T V.27ter
ITU-T V.21

Fax Standards

EIA 578 Class 1 FAX
EIA 592 Class 2.0 FAX

Front Channel Link Rates (Download Speeds)

28000, 29333, 30666, 32000, 33333, 34666, 36000, 37333, 38666, 40000, 41333, 42666, 44000, 45333, 46666, 48000, 49333, 50666, 52000, 53333, 54666, 56000

Back Channel Link Rates (Upload Speeds)

4800, 7200, 9600, 12000, 14400, 16800, 19200, 21600, 24000, 26400, 28800, 31200

V.34 Link Rates

4800, 7200, 9600, 12000, 14400, 16800, 19200, 21600, 24000, 26400, 28800, 31200, 33600

V.32 bis Link Rates

4800, 7200, 9600, 12000, 14400

Additional Link Rates

300, 1200/75 (V.23), 1200, 2400

Fax Link Rates

2400, 4800, 7200, 9600, 12000, 14400

Flash ROM Upgradable

56K Faxmodem supports software download through flash memory. You can obtain the latest features by downloading updates quickly and easily.

Front Panel Lights

PWR Power The modem is turned on.
CD Carrier Detect ON if modem receives a valid data signal (carrier) from a remote modem, indicating that a data transmission is possible. Always ON if CD override is ON (&C0).
RD Received Data Flashes when modem sends result codes or passes received data bits from remote.
SD Send Data Flashes when computer sends a data bit to modem.

Caller ID Feature (UK Only)

The Caller ID feature discloses the identification of the caller prior to answering the call. You can enable/disable this feature through the software application and are then able to view the calling telephone number from within a dialling window. Messages retrieved from Independent mode will be stored with identification within the software mailbox.

Caller ID must be subscribed from your telephone provider and needs to be compatible with the British Telecom Caller ID systems before this feature can be utilised.

  • #CID=n Controls Caller ID feature
  • #CID=0 Caller ID disabled
  • #CID=1 Caller ID enabled with formatted information
  • #CID=2 Caller ID enabled with unformatted information