How a Cable Modem Works

Web Diagnostic Interface Reference


SNMP Management


USRobotics Regulatory Information



USRobotics USR6000 Cable Modem Guide

Regulatory Approvals

USRobotics Corporation
935 National Parkway
Schaumburg, IL 60173


declares that this product conforms to the FCC's specifications:

Part 15, Class B:

Operation is subject to the following conditions:

  1. this device may not cause harmful electromagnetic interference.
  2. this device must accept any interference received including interference that may cause undesired operations.

This equipment uses the following USOC jacks: RJ-45

Radio and Television Interference:
This equipment generates, uses, and can radiate radio frequency energy. If this equipment is not installed and used in accordance with the manufacturer's instructions, it may cause interference to radio and television communications. The cable modem has been tested and found to comply with the limits for a Class B computing device in accordance with the specifications in Part 15 of FCC rules, which redesigned to provide reasonable protection against such interference in a residential installation.

Caution to the User:
The user is cautioned that any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

UL Listing/CUL Listing or CSA Certified
10 VDC 1.2 Amp Power Adapters Only

This information technology equipment is, UL-Listed and CUL-Listed or CSA-Certified for the uses described in the Quick Installation Guide.

Industry Canada (IC)
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the interference-causing equipment standard entitled Digital Apparatus, ICES-003 of Industry Canada.

Cet appareil numérique respecte les limites de bruits r dioélectriques applicables ux appareils numériques de classe B prescrites dans la norme sur le matériel brouilleur:

"Appareils Numériques", NMB-003 édictée par l 'Industrie Canada.

Centre de guarantie et de service après-vente:

Unit-100,13751 Mayfield Pl.
Richmond,B.C.Canada V6V 2G9

CE Compliance

This device complies with the requirements of European Directive 1999/5/EC.

We, USRobotics Corporation of 935 National Parkway, Schaumburg, Illinois, 60173-5157, USA, declare under our sole responsibility that the USRobotics Cable Modem, Model 6000, to which this declaration relates, is in conformity with the following standards and/or other normative documents:

  • EN60950
  • EN55022
  • EN55024
  • EN61000-3-2
  • EN61000-3-3

We hereby declare that this product is in conformity to all the essential requirements and other relevant provisions of Directive 1999/5/EC.The conformity assessment procedure referred to in Article 10 (3)and detailed in Annex II of Directive 1999/5/EC has been followed.

USRobotics Corporation
935 National Parkway
Schaumburg, Illinois

No part of this documentation may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from USRobotics Corporation.

USRobotics Corporation reserves the right to revise this documentation and to make changes in the products and/or content of this document from time to time without obligation to provide notification of such revision or change.

USRobotics Corporation provides this documentation without warranty of any kind, either implied or expressed, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose.

If there is any software on removable media described in this documentation, it is furnished under a license agreement included with the product as a separate document, in the hard copy documentation, or on the removable media in a directory file named LICENSE.TXT or !LICENSE.TXT. If you are unable to locate a copy, please contact USRobotics and a copy will be provided to you.


If you are a United States government agency, then this documentation and the software described herein are provided to you subject to the following:

All technical data and computer software are commercial in nature and developed solely at private expense. Software is delivered as "Commercial Computer Software" as defined in DFARS 252.227-7014 (June 1995) or as a "commercial item" as defined in FAR 2.101(a) and as such is provided with only such rights as are provided in USRobotics standard commercial license for the Software. Technical data is provided with limited rights only as provided in DFAR 252.227-7015 (Nov 1995) or FAR 52.227-14 (June 1987) whichever is applicable. You agree not to remove or deface any portion of any legend provided on any licensed program or documentation contained in, or delivered to you in conjunction with, this User Guide.

Copyright © 2002 USRobotics Corporation. All rights reserved.

USRobotics and the USRobotics logo are registered trademarks of US Robotics Corporation.

All other company and product names may be trademarks of the respective companies with which they are associated.