This USRobotics User Guide uses scripting to display its information correctly. This browser either doesn’t support scripting or has scripting disabled. Please refer to your browser’s documentation for instructions on how to enable scripting.

LAN Information

To get to the LAN menu, you need to connect to the gateway configuration pages.

These are the options available in the LAN menu:

DHCP Server: Manage your DHCP (Dynamic Host Configuration Protocol) settings:
Mapped Interfaces: Use this page to re-direct ATM traffic to a specific Ethernet or wireless port, or a group of ports.
Routing Table: The routing table shows the IP addresses or address routes for the computers connected to the gateway
Static Route: Set up static routes to connect machines not on the gateway's local network.
RIP: Control the RIP (Routing Information Protocol) settings for your local network.
ARP Table: View information on all computers that have transferred data to the gateway.
DHCP Clients: View the clients currently connected to the gateway.