Wireless USB Print Server User Guide

The U.S. Robotics Wireless USB Print Server User Guide uses scripting to display its information correctly. This browser either doesn’t support scripting or has scripting disabled. Please refer to your browser’s documentation for instructions on how to enable scripting.

The following section describes the various functions of the Web User Interface. This utility provides quick access to all the settings of the Wireless USB Print Server.

To access the Web User Interface:

Start you Web browser.
In the location or address line, type the IP address of the Wireless USB Print Server and press ENTER.
IP Address Example: 192.168.x.x

If you do not know the IP address of the Wireless USB Print Server, open the BiAdmin Management Utility. The IP address, along with other information about the print server, is displayed on the first screen of the utility. You could also run the Setup Wizard and write down the IP address when it is displayed or print a copy of the diagnostic page. The IP address is among the information provided in the diagnostic page.

When the Web User Interface has opened, you will see the following menu options on the left-hand side: